| Management number | 219468566 | Release Date | 2026/05/03 | List Price | $11.95 | Model Number | 219468566 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Hot Racing 46 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the TRA E Revo2, 6S and 8S, Mxx 4S, XO-1.XRT and Sand CarFEATURES: - CNC machined hardened steel construction- Black oxide finished- Laser etched tooth count markingYOU WILL RECEIVE: - One (1) 46 tooth, 1.0 modulus steel spur gearREQUIREMENTS: - Do NOT use the pin system for setting the gear mesh. Instead, manually set the gear mesh without the pins. Refer to the TRA manual for instructions (ref. pg.22 - Adjusting Gear Mesh)- With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. SPECIFICATIONS: - Overall diameter: 48.7mm- Gear face width: 8mmCOMMENTS: - Replace TRA plastic 6447 or 6447X 54T spur gear
| UPC | 083745293197 |
|---|---|
| Model | ERVT46M01 |
| Brand Name | Hot Racing |
| Part Number | ERVT46M01 |
| Manufacturer | Hot Racing |
| Material Type | Plastic |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form